Author: Jonathan Swain (aka "PurdueGuy")
Relevant Models
1997-2002 SC1
1997-2002 SC2
1996-2002 SL
1996-2002 SL1
1996-2002 SL2
1996-2001 SW1
1996-2001 SW2
Tools
- 10mm deep socket
- Flathead screwdriver (for power mirrors)
Removal
Step 1
Then remove the foam chunk from behind the trim piece.
Step 2
Remove 3 nuts. Using the 10mm deep socket, remove the nuts – normal threading.
Step 3
Disconnect wiring harness (if applicable). Power mirrors have a simple wiring harness. Use the flathead screwdriver to press the tab & disconnect the harness.
Step 4
Remove mirror. The 3 bolts should slide right out. If the mirror has a manual control or wiring harness, guide it out carefully as well.
Installation
Installation is the reverse of removal.