Author: Jonathan Swain (aka "PurdueGuy")
- E10 (torx) wrench or socket
- Flathead screwdriver (driver’s side only, optional but helpful)
Slide the seat all the way back for clearance.
Remove 2 front bolts. There are 2 E10 bolts.
Move the seat all the way forward and tip the seatback forward for clearance.
Remove 2 rear bolts. 2 more E10 bolts in the back.
(Driver’s side only) Unclip the seatbelt sensor. This is where the flathead comes in handy – makes it easy to push the clip down.
Installation is the reverse of removal.