Guide Needed! Sorry, this is just a placeholder post – we need someone to build this guide! Click the button above if you’d like to contact us about building & submitting this guide. … Continue reading
Tag Archives: 1991 SL
Author: Jonathan Swain (aka “PurdueGuy”) Unfortunately the images for this guide corrupted. Hopefully we get a chance to replace them someday. Relevant Models All S-Series Tools 13mm wrench or socket & ratchet Removal Note Note: I recommend leaving the wiper blade … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools 13mm deep socket Ratchet Torque wrench Removal Note: pictures depict an adjustable strut bar. Installation instructions are for a non-adjustable 1-piece bar. Step 1 Park the car on a flat, … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools Tools (definitely need): 13mm deep socket Ratchet Torque wrench Tools (depending on strut bar design): Sockets (size depending on your bar) Locking pliers or large hex keys (depending on your bar) … Continue reading
Author: The Shaolin Intro I just swapped a set of 4 leather seats into my 2000 SC1. The seats are leather and came from a 1997 SL2. I came across some issues that I didn’t expect, so thus, a quick … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools T10 (torx) screwdriver Removal This is a very easy job – the mirror is held on with a set screw. Using a T10 (torx) screwdriver, loosen the set screw, and … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series except wagons 1991-1992 SC 1993-2002 SC1 1993-2002 SC2 1991-2002 SL 1991-2002 SL1 1991-2002 SL2 Tools (None) Removal Step 1 Undo Velcro attaching trunk liner (Note: Seat base and half of seat … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Tools Scissors Thin foam Installation This is a simple solution to an aftermarket stereo faceplate that is loose and vibrates. Just find some very thin foam, and cut it out to fit the back of … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Intro This guide is for the DOHC engine with aluminum valve cover, found on most (but not all) 1991-1995 SC/SC2/SL2/SW2 models. However, it’s very similar on other models, and even on the SOHC engine. PCV … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools 14mm socket & ratchet Filter wrench (cap type & socket, or strap type) Funnel (optional) Parts/Supplies Oil filter Oil (4-5qts) Procedure Step 1 Warm up the engine. Warm oil will flow … Continue reading