Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series 1995 – 2002 Tools Flathead screwdriver Removal Step 1 Insert flathead screwdriver into slot by center pin and gently pry outward Step 2 Pull the center pin out until it stops … Continue reading
Tag Archives: 2000 SC2
Author: Jonathan Swain (aka “PurdueGuy”) Description This is a way to get a shorter shifter, somewhat reducing the distance of the throws between shifts. This is not a true short shifter, which would move the fulcrum (pivot) point of the … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with manual transmission Tools Ratchet 10mm socket 13mm socket (might require deep socket?) Needle-nose pliers Large pliers (slip-joint pliers work well) 2 flat-head screwdrivers Removal Step 1 Remove Center Console (91-94) … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2000 SC1 1997-2000 SC2 1996-2000 SL 1996-2000 SL1 1996-2000 SL2 1996-2000 SW1 1996-2000 SW2 Tools Flathead screwdriver 7mm socket & ratchet Removal Step 1 Pop the end covers loose. Put the flathead screwdriver behind … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2002 SC1 1997-2002 SC2 Tools T50 (torx) socket Ratchet Removal Remove both bolts, as shown, using a T50 torx socket. Installation Installation is the reverse of removal. It is recommended to reapply loctite to … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools E10 (torx) wrench or socket Flathead screwdriver Phillips screwdriver Removal Step 1 Remove Front Seats Step 2 Remove Rear Seat Base Step 3 Remove Center Console (1991-1994) Remove Center Console … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1999-2002 SC1 (3 door) 1999-2002 SC2 (3 door) Tools (None) Removal / Installation This how-to was done on a late ’99 SC 3-door. The same basic methods of removal should work for many … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools (None) Removal Step 1 Squeeze the seat base toward the back of the car, then up, then release. Do this for both sides. The seat base is not screwed or … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools E10 (torx) wrench or socket Flathead screwdriver (driver’s side only, optional but helpful) Removal Step 1 Slide the seat all the way back for clearance. Step 2 Remove 2 front … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with manual transmission Tools (None) Notes There are 2 ways to remove the shift knob – cut it and remove the clip, or pull really hard. The pulling method is easy … Continue reading