Author: Jonathan Swain (aka "PurdueGuy")
Relevant Models
All 1995 – 1999 S-Series (with optional armrest)
Tools
- Phillips screwdriver
- Flathead screwdriver
Installation
Step 1
Remove screw hole cover. At the back of the center console, there is a plastic cover over 2 screw holes. The location is marked below, but the cover is not shown. Just pop the cover loose with the flat-head screwdriver.
Step 2
Set the armrest in the hole. Pretty straightforward.
Step 3
Screw it in. Put 2 screws in at the back of the inside of the armrest. Place the screw hole cover back in place.
Removal
Installation is the reverse of removal.