Author: Jonathan Swain (aka "PurdueGuy")
Relevant Models
All 1995-1999 S-Series
Tools
(None)
Removal
Step 1
Pull up & back. The cupholders are just snapped into place. As you pull up, also pull back toward the shifter some. It won’t require a lot of force, but don’t be afraid to give it a good tug. Be careful not not to yank it way out, since there are wires attached. As you can see, my cupholders were nasty from a major drink spill and needed cleaned.
Step 2
Remove the light. The light should slide back & out. You may have to tilt the harness a bit to release it. There is a little door that you can pop open with a screwdriver if you need to get at the lenses, which are just thin plastic.
Installation
Installation is the reverse of removal.