Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1991-1995 SL 1991-1995 SL1 1991-1995 SL2 1993-1995 SW1 1993-1995 SW2 Tools Phillips Screwdriver Small prying device (optional) Removal Step 1 Remove philips screw at the base of the A-pillar. Step 2 Unclip trim … Continue reading
Category Archives: PurdueGuy
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2002 SC1 1997-2002 SC2 1996-2002 SL 1996-2002 SL1 1996-2002 SL2 1996-2001 SW1 1996-2001 SW2 Tools Flat-head screwdriver or other prying tool Philips screwdriver Removal Step 1 Remove the screw behind the pull handle. … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2002 SC1 1997-2002 SC2 1996-2002 SL 1996-2002 SL1 1996-2002 SL2 1996-2001 SW1 1996-2001 SW2 Tools Flat-head screwdriver or other prying tool #2 or 5/64 hex tool (only needed for manual control rod trim … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2002 SC1 1997-2002 SC2 Tools Flat-head screwdriver or other prying tool Philips screwdriver Removal Step 1 Remove Side Mirror Interior Trim If it’s attached to the mirror by cables (manual adjuster) or a … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Intro IAT = Intake Air Temperature sensor The IAT sensor is a thermistor – that is, it’s a resistor that changes resistance with temperature. The resistance level tells the PCM the coolant temperature. The ECTS … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All 1995 – 1999 S-Series Tools Ratchet 7mm socket Remove Fan Control Remove the two 1/4″ screws (I have no idea why these aren’t metric like the rest of the car) and remove … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2000 SC1 1997-2000 SC2 Tools 10mm socket Ratchet Removal Step 1 Remove 2 bolts. 10mm Step 2 Lift the headlights, then move them forward. The bottom of the headlight bracket rests in a notch, so … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All 1995 – 1999 S-Series Tools Ratchet 5.5mm socket 7mm socket ?mm socket (for steering column bolts) Something small & pointy (small screwdriver works well, see step 5) Flathead screwdriver Removal Step 1 … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with sunroof Tools Flathead screwdriver or other prying device Removal Step 1 Remove Map Light Cover Step 2 Unclip the switch. Use your screwdriver to unclip the front & back ends of … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with sunroof Tools (None) Removal Gently but firmly pull down near a corner of the trim, then work around. The trim is snapped on near each corner (four snap points), but there … Continue reading