Author: Jonathan Swain (aka "PurdueGuy")
Relevant Models
1991-1995 SL
1991-1995 SL1
1991-1995 SL2
1993-1995 SW1
1993-1995 SW2
Tools
- Phillips Screwdriver
- Small prying device (optional)
Removal
Step 1
Remove philips screw at the base of the A-pillar.
Step 2
Unclip trim carefully. You will likely break off some clips, unfortunately. To minimize this, use a small prying tool and pry the trim outward as near to the clips as possible. Sadly, some clips will likely still break.
Good clip:
Broken clip:
Broken clip left in the car:
Installation
Installation is the reverse of removal. Line the clips up and snap them in.