Author: Jonathan Swain (aka "PurdueGuy")
Relevant Models
1991-1995 SL
1991-1995 SL1
1991-1995 SL2
1993-1995 SW1
1993-1995 SW2
Tools
- Small prying device (optional)
Removal
Step 1
Loosen or remove overlapping trim. Three pieces of trim – the front door upper trim, the front door lower trim, and the rear door lower trim – overlap with this one, and they need to be loosened or removed.
Step 2
Slide the trim piece upward. It will slide up about an inch, takes a fair amount of effort.
Step 3
Slide seatbelt through hole. Slip it through enough that it won’t catch when you get the trim piece free.
Step 4
Peel the edges of the trim piece off as much as possible, then slide the trim piece downward. It should pop right off.
Installation
Installation is the reverse of removal.