Remove / Install Map Light Assembly

Author: Jonathan Swain (aka "PurdueGuy")

Relevant Models

All S-Series with sunroof


  • Phillips screwdriver
  • Flathead screwdriver


Step 2

This will loosen up the headliner a bit, giving some space you’ll need later.

Step 3

This may not be absolutely necessary, but the wiring for this switch is fairly tight, so it’s probably easier to just take it out first.

Step 4

Remove one phillips screw on the driver’s side. You’ll probably have to look almost straight up to notice it, but it’s there.

Step 5

Wiggle the assembly out of the headliner. GENTLY pull down a bit on the headliner to get enough clearance to twist & angle the piece out.  There will be some wires attached.

Step 6

Unplug the wiring harness. You’ll have to pry the clip to get it to release.


Installation is the reverse of removal.

Comments are closed.