Author: Jonathan Swain (aka “PurdueGuy”) Unfortunately the images for this guide corrupted. Hopefully we get a chance to replace them someday. Relevant Models All S-Series Tools 13mm wrench or socket & ratchet Removal Note Note: I recommend leaving the wiper blade … Continue reading
Tag Archives: 1996 SL
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1991-1992 SC 1995-2002 SC1 1993-1999 SC2 1995-2002 SL 1995-2002 SL1 1991-1999 SL2 1993-2001 SW1 1993-1999 SW2 Tools *These steps could be done with the throttlebody attached or removed.* TPS = Throttle Position Sensor … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Unfortunately some of the images for this guide were corrupted. Hopefully we’re able to replace them someday. Relevant Models 1991-1992 SC 1995-2002 SC1 1993-1999 SC2 1995-2002 SL 1995-2002 SL1 1991-1999 SL2 1993-2001 SW1 1993-1999 SW2 … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1991-1992 SC 1995-2002 SC1 1993-1999 SC2 1995-2002 SL 1995-2002 SL1 1991-1999 SL2 1993-2001 SW1 1993-1999 SW2 Tools Locking pliers or flathead screwdriver (depending on your clamp style) Torx bit (size?) for TPS & IAC Ratchet … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2002 SC1 1997-2002 SC2 1996-2002 SL 1996-2002 SL1 1996-2002 SL2 Tools (None) Removal Wiggle your fingers underneath the cover, and pull downward. There are two clips that should come free. Installation Just line up … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Intro This is also commonly known as the upper engine mount, or is often listed in parts catalogs as just “engine mount”. It is good to know that there are 2 types of engine mounts. … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools 13mm deep socket Ratchet Torque wrench Removal Note: pictures depict an adjustable strut bar. Installation instructions are for a non-adjustable 1-piece bar. Step 1 Park the car on a flat, … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools Tools (definitely need): 13mm deep socket Ratchet Torque wrench Tools (depending on strut bar design): Sockets (size depending on your bar) Locking pliers or large hex keys (depending on your bar) … Continue reading
Author: The Shaolin Intro I just swapped a set of 4 leather seats into my 2000 SC1. The seats are leather and came from a 1997 SL2. I came across some issues that I didn’t expect, so thus, a quick … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools T10 (torx) screwdriver Removal This is a very easy job – the mirror is held on with a set screw. Using a T10 (torx) screwdriver, loosen the set screw, and … Continue reading