Author: Jonathan Swain (aka “PurdueGuy”) Unfortunately the images for this guide corrupted. Hopefully we get a chance to replace them someday. Relevant Models All S-Series Tools 13mm wrench or socket & ratchet Removal Note Note: I recommend leaving the wiper blade … Continue reading
Tag Archives: 1998 SC1
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1991-1992 SC 1995-2002 SC1 1993-1999 SC2 1995-2002 SL 1995-2002 SL1 1991-1999 SL2 1993-2001 SW1 1993-1999 SW2 Tools *These steps could be done with the throttlebody attached or removed.* TPS = Throttle Position Sensor … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Unfortunately some of the images for this guide were corrupted. Hopefully we’re able to replace them someday. Relevant Models 1991-1992 SC 1995-2002 SC1 1993-1999 SC2 1995-2002 SL 1995-2002 SL1 1991-1999 SL2 1993-2001 SW1 1993-1999 SW2 … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1991-1992 SC 1995-2002 SC1 1993-1999 SC2 1995-2002 SL 1995-2002 SL1 1991-1999 SL2 1993-2001 SW1 1993-1999 SW2 Tools Locking pliers or flathead screwdriver (depending on your clamp style) Torx bit (size?) for TPS & IAC Ratchet … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2002 SC1 1997-2002 SC2 1996-2002 SL 1996-2002 SL1 1996-2002 SL2 Tools (None) Removal Wiggle your fingers underneath the cover, and pull downward. There are two clips that should come free. Installation Just line up … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Intro This is also commonly known as the upper engine mount, or is often listed in parts catalogs as just “engine mount”. It is good to know that there are 2 types of engine mounts. … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2000 SC1 1997-2000 SC2 Tools T-15 Torx screwdriver or socket (optional): Flathead screwdriver or other prying device, and a rag Removal Step 1 Open the trunk. Step 2 Remove the 2 torx screws. Normal … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools 13mm deep socket Ratchet Torque wrench Removal Note: pictures depict an adjustable strut bar. Installation instructions are for a non-adjustable 1-piece bar. Step 1 Park the car on a flat, … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools Tools (definitely need): 13mm deep socket Ratchet Torque wrench Tools (depending on strut bar design): Sockets (size depending on your bar) Locking pliers or large hex keys (depending on your bar) … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2000 SC1 1997-2000 SC2 Tools 10mm socket ratchet Removal Step 1 Open the trunk lid Step 2 Remove 4 bolts. Use your 10mm socket and remove the 4 bolts circled below on the underside … Continue reading