Remove / Install Defrost Vent Duct (’91-’94 S-Series)

Author: Jonathan Swain (aka "PurdueGuy")

Relevant Models

All 1991 – 1994 S-Series


  • Ratchet
  • 7mm socket


Step 2

Remove the two 7mm screws.

These are at the top of the duct by the windshield.

Step 3

Unsnap and remove.

It is held in place by snaps on each side. You can unsnap it with your hands.  Start with the driver’s side, then wiggle it loose from the passenger side clip.  I found I got the best leverage/angle from the passenger seat.  You can see the snaps if you get out of the car and look through the windshield.


Installation is the reverse of removal.

Comments are closed.