Remove / Install Dome Light

Author: Jonathan Swain (aka "PurdueGuy")

Relevant Models

All S-Series


  • Flathead screwdriver



*NOTE* Don’t simply try to pry downward on the dome light – you will break two tabs off! (They may break off anyway – they’re notoriously brittle.)

Step 1

Push the dome lamp on the switch end toward the light end, and gently pull downward at the same time.  There are 3 tabs that hold the light – 2 of them one one end, which are sprung.  Compressing the sprung tabs allows clearance for the third, on the other end of the dome light.

Step 3

Use the flathead screwdriver to pry the wiring harness free from the clip and pull it loose.


Installation is the reverse of removal.

Comments are closed.