Author: Jonathan Swain (aka "PurdueGuy")
Relevant Models
1991-1995 SL
1991-1995 SL1
1991-1995 SL2
1993-1995 SW1
1993-1995 SW2
Tools
- Philips Screwdriver
- Small prying device (optional)
Removal
Step 2
Remove phillips screw at the base of the A-pillar.
Step 3
Loosen or remove overlapping trim. Two pieces of trim – the front door lower trim, and the rear door upper trim – overlap with this one, and they need to be loosened or removed.
Step 4
Unclip trim carefully. You will likely break off some clips, unfortunately. To minimize this, use a small prying tool and pry the trim outward as near to the clips as possible. Sadly, some clips will likely still break.
Good clip
Broken clip
Broken clip left in the car
Installation
Installation is the reverse of removal. Line the clips up and snap them in, then reconnect the overlapping trim, and replace the philips screw.