Author: Jonathan Swain (aka “PurdueGuy”) Tools Scissors Thin foam Installation This is a simple solution to an aftermarket stereo faceplate that is loose and vibrates. Just find some very thin foam, and cut it out to fit the back of … Continue reading
Tag Archives: 1996 SC2
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools 14mm socket & ratchet Filter wrench (cap type & socket, or strap type) Funnel (optional) Parts/Supplies Oil filter Oil (4-5qts) Procedure Step 1 Warm up the engine. Warm oil will flow … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with sunroof Intro One evening, I pushed the button to one of my map lights… a little harder than usual. It turned on, but the button no longer worked. I had … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with sunroof Tools Rag (installation only) Removal Step 1 Remove Map Light Cover Step 2 Pop the bulb loose. It’s just a wedged-in bulb, so you can just pop it loose with … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools Phillips screwdriver Removal Remove four screws. Three at the swivel point, and one for the clip. Everything should come loose. Here’s what it looks like after it is uninstalled (just ignore … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with sunroof Tools Phillips screwdriver Flathead screwdriver Removal Step 1 Remove Map Light Cover Step 2 Remove Sun Visors This will loosen up the headliner a bit, giving some space you’ll … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Coupes (SC, SC1, SC2) Note If you want to remove the rear seat cushions, you do not need to remove the rear console separately. The entire rear seat base, cushions and … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Intro This is a mod I did in my ’99 SC1 to have a trash bin in the car without it taking up rear seat legroom, and not having something that will roll right off … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Intro IAT = Intake Air Temperature sensor The IAT sensor is a thermistor – that is, it’s a resistor that changes resistance with temperature. The resistance level tells the PCM the coolant temperature. The ECTS … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All 1995 – 1999 S-Series Tools Ratchet 7mm socket Remove Fan Control Remove the two 1/4″ screws (I have no idea why these aren’t metric like the rest of the car) and remove … Continue reading