Author: Jonathan Swain (aka “PurdueGuy”) Unfortunately the images for this guide corrupted. Hopefully we get a chance to replace them someday. Relevant Models All S-Series Tools 13mm wrench or socket & ratchet Removal Note Note: I recommend leaving the wiper blade … Continue reading
Tag Archives: 2000 SC2
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2002 SC1 1997-2002 SC2 1996-2002 SL 1996-2002 SL1 1996-2002 SL2 Tools (None) Removal Wiggle your fingers underneath the cover, and pull downward. There are two clips that should come free. Installation Just line up … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Intro This is also commonly known as the upper engine mount, or is often listed in parts catalogs as just “engine mount”. It is good to know that there are 2 types of engine mounts. … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2000 SC1 1997-2000 SC2 Tools T-15 Torx screwdriver or socket (optional): Flathead screwdriver or other prying device, and a rag Removal Step 1 Open the trunk. Step 2 Remove the 2 torx screws. Normal … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools 13mm deep socket Ratchet Torque wrench Removal Note: pictures depict an adjustable strut bar. Installation instructions are for a non-adjustable 1-piece bar. Step 1 Park the car on a flat, … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools Tools (definitely need): 13mm deep socket Ratchet Torque wrench Tools (depending on strut bar design): Sockets (size depending on your bar) Locking pliers or large hex keys (depending on your bar) … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2000 SC1 1997-2000 SC2 Tools 10mm socket ratchet Removal Step 1 Open the trunk lid Step 2 Remove 4 bolts. Use your 10mm socket and remove the 4 bolts circled below on the underside … Continue reading
Author: The Shaolin Intro I just swapped a set of 4 leather seats into my 2000 SC1. The seats are leather and came from a 1997 SL2. I came across some issues that I didn’t expect, so thus, a quick … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools T10 (torx) screwdriver Removal This is a very easy job – the mirror is held on with a set screw. Using a T10 (torx) screwdriver, loosen the set screw, and … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series except wagons 1991-1992 SC 1993-2002 SC1 1993-2002 SC2 1991-2002 SL 1991-2002 SL1 1991-2002 SL2 Tools (None) Removal Step 1 Undo Velcro attaching trunk liner (Note: Seat base and half of seat … Continue reading