Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with sunroof Tools Rag (installation only) Removal Step 1 Remove Map Light Cover Step 2 Pop the bulb loose. It’s just a wedged-in bulb, so you can just pop it loose with … Continue reading
Tag Archives: 2000 SW2
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series Tools Phillips screwdriver Removal Remove four screws. Three at the swivel point, and one for the clip. Everything should come loose. Here’s what it looks like after it is uninstalled (just ignore … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with sunroof Tools Phillips screwdriver Flathead screwdriver Removal Step 1 Remove Map Light Cover Step 2 Remove Sun Visors This will loosen up the headliner a bit, giving some space you’ll … Continue reading
Guide Needed! Sorry, this is just a placeholder post – we need someone to build this guide! Click the button above if you’d like to contact us about building & submitting this guide. … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2002 SC1 1997-2002 SC2 1996-2002 SL 1996-2002 SL1 1996-2002 SL2 1996-2001 SW1 1996-2001 SW2 Tools Flat-head screwdriver or other prying tool Philips screwdriver Removal Step 1 Remove the screw behind the pull handle. … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models 1997-2002 SC1 1997-2002 SC2 1996-2002 SL 1996-2002 SL1 1996-2002 SL2 1996-2001 SW1 1996-2001 SW2 Tools Flat-head screwdriver or other prying tool #2 or 5/64 hex tool (only needed for manual control rod trim … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Intro IAT = Intake Air Temperature sensor The IAT sensor is a thermistor – that is, it’s a resistor that changes resistance with temperature. The resistance level tells the PCM the coolant temperature. The ECTS … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with sunroof Tools Flathead screwdriver or other prying device Removal Step 1 Remove Map Light Cover Step 2 Unclip the switch. Use your screwdriver to unclip the front & back ends of … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with sunroof Tools (None) Removal Gently but firmly pull down near a corner of the trim, then work around. The trim is snapped on near each corner (four snap points), but there … Continue reading
Author: Jonathan Swain (aka “PurdueGuy”) Relevant Models All S-Series with sunroof Tools Flathead screwdriver or other prying device Removal Step 1 Remove Map Light Cover Step 2 Remove Sunroof Switch Step 3 Remove switch cover. The switch cover pivots on 2 … Continue reading